|
HOW TO TIE
YOUR BELT . . .
|
|
|
Find
the mid point of your belt by holding it up so the two ends are equal
length. |
 |
Place
the mid point flat on the mid point of your tummy! |
 |
Pass
the two ends round behind you so that they cross behind. |
|
|
As
you cross the ends behind you one side must lie UNDER the other (The
end (1) being the one underneath). |
|
As
the belt ends come round to the front your right end (1) emerges from
underneath the belt. You
are aiming to create a flat "double" belt all the way round.
|
 |
Cross
the left hand end (2) over the right hand end (1). |
 |
Now
tuck this left end (2) up and under the "double" belt
created by (1). |
 |
Flip
this end (2) so that it crosses (1) creating a "hole" and
hold the belt where it now crosses with your left hand. |
 |
Take
the end that is underneath (1) with your right hand. |
 |
Post
this end (1) up and into the "hole". |
|
 |
Take
both ends and pull tight; horizontally outwards and not up & down. |
 |
You
should have a diamond shaped knot! |
